dmesg - NVIDIA GeForce GT 440
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xcfee0000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[bus 00-3f]
pnp 00:00: >[io 0x0cf8-0x0cff]
pnp 00:00: >[io 0x0000-0x0cf7 window]
pnp 00:00: >[io 0x0d00-0xffff window]
pnp 00:00: >[mem 0x000a0000-0x000bffff window]
pnp 00:00: >[mem 0x000c0000-0x000dffff window]
pnp 00:00: >[mem 0xcff00000-0xfebfffff window]
pnp 00:00: >Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: >[io 0x0010-0x001f]
pnp 00:01: >[io 0x0022-0x003f]
pnp 00:01: >[io 0x0044-0x005f]
pnp 00:01: >[io 0x0062-0x0063]
pnp 00:01: >[io 0x0065-0x006f]
pnp 00:01: >[io 0x0074-0x007f]
pnp 00:01: >[io 0x0091-0x0093]
pnp 00:01: >[io 0x00a2-0x00bf]
pnp 00:01: >[io 0x00e0-0x00ef]
pnp 00:01: >[io 0x04d0-0x04d1]
pnp 00:01: >[io 0x0290-0x029f]
pnp 00:01: >[io 0x0800-0x087f]
pnp 00:01: >[io 0x0290-0x0294]
pnp 00:01: >[io 0x0880-0x088f]
system 00:01: >[io 0x04d0-0x04d1] has been reserved
system 00:01: >[io 0x0290-0x029f] has been reserved
system 00:01: >[io 0x0800-0x087f] has been reserved
system 00:01: >[io 0x0290-0x0294] has been reserved
system 00:01: >[io 0x0880-0x088f] has been reserved
system 00:01: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: >[dma 4]
pnp 00:02: >[io 0x0000-0x000f]
pnp 00:02: >[io 0x0080-0x0090]
pnp 00:02: >[io 0x0094-0x009f]
pnp 00:02: >[io 0x00c0-0x00df]
pnp 00:02: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: >[irq 0 disabled]
pnp 00:03: >[irq 8]
pnp 00:03: >[mem 0xfed00000-0xfed003ff]
pnp 00:03: >Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: >[io 0x0070-0x0073]
pnp 00:04: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: >[io 0x0061]
pnp 00:05: >Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: >[io 0x00f0-0x00ff]
pnp 00:06: >[irq 13]
pnp 00:06: >Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: >[io 0x03f8-0x03ff]
pnp 00:07: >[irq 4]
pnp 00:07: >Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: >[io 0x0378-0x037f]
pnp 00:08: >[irq 7]
pnp 00:08: >Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:09: >[io 0x0060]
pnp 00:09: >[io 0x0064]
pnp 00:09: >[irq 12]
pnp 00:09: >Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:0a: >[io 0x0400-0x04bf]
system 00:0a: >[io 0x0400-0x04bf] has been reserved
system 00:0a: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: >[mem 0xf0000000-0xf3ffffff]
system 00:0b: >[mem 0xf0000000-0xf3ffffff] has been reserved
system 00:0b: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: >[mem 0x000d6000-0x000d7fff]
pnp 00:0c: >[mem 0x000f0000-0x000f7fff]
pnp 00:0c: >[mem 0x000f8000-0x000fbfff]
pnp 00:0c: >[mem 0x000fc000-0x000fffff]
pnp 00:0c: >[mem 0xcfee0000-0xcfefffff]
pnp 00:0c: >[mem 0x00000000-0x0009ffff]
pnp 00:0c: >[mem 0x00100000-0xcfedffff]
pnp 00:0c: >[mem 0xfec00000-0xfec00fff]
pnp 00:0c: >[mem 0xfed10000-0xfed1dfff]
pnp 00:0c: >[mem 0xfed20000-0xfed8ffff]
pnp 00:0c: >[mem 0xfee00000-0xfee00fff]
pnp 00:0c: >[mem 0xffb00000-0xffb7ffff]
pnp 00:0c: >[mem 0xfff00000-0xffffffff]
pnp 00:0c: >[mem 0x000e0000-0x000effff]
system 00:0c: >[mem 0x000d6000-0x000d7fff] has been reserved
system 00:0c: >[mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0c: >[mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0c: >[mem 0x000fc000-0x000fffff] could not be reserved
system 00:0c: >[mem 0xcfee0000-0xcfefffff] could not be reserved
system 00:0c: >[mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: >[mem 0x00100000-0xcfedffff] could not be reserved
system 00:0c: >[mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0c: >[mem 0xfed10000-0xfed1dfff] has been reserved
system 00:0c: >[mem 0xfed20000-0xfed8ffff] has been reserved
system 00:0c: >[mem 0xfee00000-0xfee00fff] has been reserved
system 00:0c: >[mem 0xffb00000-0xffb7ffff] has been reserved
system 00:0c: >[mem 0xfff00000-0xffffffff] has been reserved
system 00:0c: >[mem 0x000e0000-0x000effff] has been reserved
system 00:0c: >Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0d: >[mem 0xffb80000-0xffbfffff]
pnp 00:0d: >Plug and Play ACPI device, IDs INT0800 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: >bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000
pci 0000:00:1c.0: >bridge window [mem 0x00100000-0x000fffff] to [bus 02-02] add_size 200000
pci 0000:00:1c.3: >bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000
pci 0000:00:1c.4: >bridge window [mem 0x00100000-0x001fffff pref] to [bus 04-04] add_size 200000
pci 0000:00:1c.0: >res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: >res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.3: >res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.4: >res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: >BAR 14: assigned [mem 0xf9200000-0xf93fffff]
pci 0000:00:1c.0: >BAR 15: assigned [mem 0xf9400000-0xf95fffff 64bit pref]
pci 0000:00:1c.3: >BAR 15: assigned [mem 0xf9600000-0xf97fffff 64bit pref]
pci 0000:00:1c.4: >BAR 15: assigned [mem 0xf9800000-0xf9afffff pref]
pci 0000:01:00.0: >BAR 6: assigned [mem 0xe2000000-0xe207ffff pref]
pci 0000:00:01.0: >PCI bridge to [bus 01-01]
pci 0000:00:01.0: > bridge window [io 0xb000-0xbfff]
pci 0000:00:01.0: > bridge window [mem 0xf4000000-0xf6ffffff]
pci 0000:00:01.0: > bridge window [mem 0xd0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
pci 0000:00:1c.0: > bridge window [io 0xa000-0xafff]
pci 0000:00:1c.0: > bridge window [mem 0xf9200000-0xf93fffff]
pci 0000:00:1c.0: > bridge window [mem 0xf9400000-0xf95fffff 64bit pref]
pci 0000:00:1c.3: >PCI bridge to [bus 03-03]
pci 0000:00:1c.3: > bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.3: > bridge window [mem 0xf9000000-0xf90fffff]
pci 0000:00:1c.3: > bridge window [mem 0xf9600000-0xf97fffff 64bit pref]
pci 0000:04:00.0: >BAR 6: assigned [mem 0xf9800000-0xf980ffff pref]
pci 0000:00:1c.4: >PCI bridge to [bus 04-04]
pci 0000:00:1c.4: > bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: > bridge window [mem 0xf7000000-0xf8ffffff]
pci 0000:00:1c.4: > bridge window [mem 0xf9800000-0xf9afffff pref]
pci 0000:00:1e.0: >PCI bridge to [bus 05-05]
pci 0000:00:1e.0: > bridge window [io 0x9000-0x9fff]
pci 0000:00:1e.0: >setting latency timer to 64
pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: >resource 8 [mem 0xcff00000-0xfebfffff]
pci_bus 0000:01: >resource 0 [io 0xb000-0xbfff]
pci_bus 0000:01: >resource 1 [mem 0xf4000000-0xf6ffffff]
pci_bus 0000:01: >resource 2 [mem 0xd0000000-0xefffffff 64bit pref]
pci_bus 0000:02: >resource 0 [io 0xa000-0xafff]
pci_bus 0000:02: >resource 1 [mem 0xf9200000-0xf93fffff]
pci_bus 0000:02: >resource 2 [mem 0xf9400000-0xf95fffff 64bit pref]
pci_bus 0000:03: >resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: >resource 1 [mem 0xf9000000-0xf90fffff]
pci_bus 0000:03: >resource 2 [mem 0xf9600000-0xf97fffff 64bit pref]
pci_bus 0000:04: >resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: >resource 1 [mem 0xf7000000-0xf8ffffff]
pci_bus 0000:04: >resource 2 [mem 0xf9800000-0xf9afffff pref]
pci_bus 0000:05: >resource 0 [io 0x9000-0x9fff]
pci_bus 0000:05: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:05: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:05: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: >resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:05: >resource 8 [mem 0xcff00000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: >Boot video device
PCI: CLS 32 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcbeda000-0xcfed9fff] (64MB) mapped at [ffff8800cbeda000-ffff8800cfed9fff]
audit: initializing netlink socket (disabled)
type=2000 audit(1350876254.168:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 7870
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: >irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: >irq 41 for MSI/MSI-X
pcieport 0000:00:1c.3: >irq 42 for MSI/MSI-X
pcieport 0000:00:1c.4: >irq 43 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
Freeing initrd memory: 14872k freed
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: >version 3.0
ahci 0000:00:1f.2: >irq 44 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: >AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: >flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems
ahci 0000:00:1f.2: >setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf9106000 port 0xf9106100 irq 44
ata2: SATA max UDMA/133 abar m2048@0xf9106000 port 0xf9106180 irq 44
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf9106000 port 0xf9106300 irq 44
ata6: SATA max UDMA/133 abar m2048@0xf9106000 port 0xf9106380 irq 44
ahci 0000:03:00.0: >AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: >flags: 64bit ncq pm led clo pmp pio slum part
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xf9000000 port 0xf9000100 irq 19
ata8: SATA max UDMA/133 abar m8192@0xf9000000 port 0xf9000180 irq 19
pata_acpi 0000:03:00.1: >setting latency timer to 64
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: >setting latency timer to 64
ehci_hcd 0000:00:1a.7: >EHCI Host Controller
ehci_hcd 0000:00:1a.7: >new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: >cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: >irq 18, io mem 0xf9104000
ehci_hcd 0000:00:1a.7: >USB 2.0 started, EHCI 1.00
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: EHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb1: >SerialNumber: 0000:00:1a.7
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >6 ports detected
ehci_hcd 0000:00:1d.7: >setting latency timer to 64
ehci_hcd 0000:00:1d.7: >EHCI Host Controller
ehci_hcd 0000:00:1d.7: >new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: >cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: >irq 23, io mem 0xf9105000
ehci_hcd 0000:00:1d.7: >USB 2.0 started, EHCI 1.00
usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: >Product: EHCI Host Controller
usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb2: >SerialNumber: 0000:00:1d.7
hub 2-0:1.0: >USB hub found
hub 2-0:1.0: >6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: >setting latency timer to 64
uhci_hcd 0000:00:1a.0: >UHCI Host Controller
uhci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: >irq 16, io base 0x0000e100
usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: >Product: UHCI Host Controller
usb usb3: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb3: >SerialNumber: 0000:00:1a.0
hub 3-0:1.0: >USB hub found
hub 3-0:1.0: >2 ports detected
uhci_hcd 0000:00:1a.1: >setting latency timer to 64
uhci_hcd 0000:00:1a.1: >UHCI Host Controller
uhci_hcd 0000:00:1a.1: >new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: >irq 21, io base 0x0000e200
usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: >Product: UHCI Host Controller
usb usb4: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb4: >SerialNumber: 0000:00:1a.1
hub 4-0:1.0: >USB hub found
hub 4-0:1.0: >2 ports detected
uhci_hcd 0000:00:1a.2: >setting latency timer to 64
uhci_hcd 0000:00:1a.2: >UHCI Host Controller
uhci_hcd 0000:00:1a.2: >new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: >irq 18, io base 0x0000e000
usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: >Product: UHCI Host Controller
usb usb5: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb5: >SerialNumber: 0000:00:1a.2
hub 5-0:1.0: >USB hub found
hub 5-0:1.0: >2 ports detected
uhci_hcd 0000:00:1d.0: >setting latency timer to 64
uhci_hcd 0000:00:1d.0: >UHCI Host Controller
uhci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: >irq 23, io base 0x0000e300
usb usb6: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: >Product: UHCI Host Controller
usb usb6: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb6: >SerialNumber: 0000:00:1d.0
hub 6-0:1.0: >USB hub found
hub 6-0:1.0: >2 ports detected
uhci_hcd 0000:00:1d.1: >setting latency timer to 64
uhci_hcd 0000:00:1d.1: >UHCI Host Controller
uhci_hcd 0000:00:1d.1: >new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: >irq 19, io base 0x0000e400
usb usb7: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: >Product: UHCI Host Controller
usb usb7: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb7: >SerialNumber: 0000:00:1d.1
hub 7-0:1.0: >USB hub found
hub 7-0:1.0: >2 ports detected
uhci_hcd 0000:00:1d.2: >setting latency timer to 64
uhci_hcd 0000:00:1d.2: >UHCI Host Controller
uhci_hcd 0000:00:1d.2: >new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: >irq 18, io base 0x0000e500
usb usb8: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: >Product: UHCI Host Controller
usb usb8: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb8: >SerialNumber: 0000:00:1d.2
hub 8-0:1.0: >USB hub found
hub 8-0:1.0: >2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: >RTC can wake from S4
rtc_cmos 00:04: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 0:368:412
rtc_cmos 00:04: >setting system clock to 2012-10-22 03:24:14 UTC (1350876254)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata8: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATAPI: TSSTcorp CDDVDW SH-S203D, SB00, max UDMA/100
ata7.00: HPA detected: current 976771055, native 976773168
ata7.00: ATA-8: ST3500320AS, SD15, max UDMA/133
ata7.00: 976771055 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: >CD-ROM TSSTcorp CDDVDW SH-S203D SB00 PQ: 0 ANSI: 5
ata7.00: configured for UDMA/133
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: >Attached scsi CD-ROM sr0
sr 0:0:0:0: >Attached scsi generic sg0 type 5
usb 2-1: >new high-speed USB device number 2 using ehci_hcd
Refined TSC clocksource calibration: 2399.999 MHz.
Switching to clocksource tsc
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
usb 2-1: >New USB device found, idVendor=0bda, idProduct=0158
usb 2-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: >Product: USB2.0-CRW
usb 2-1: >Manufacturer: Generic
usb 2-1: >SerialNumber: 20060413092100000
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ata6: SATA link down (SStatus 0 SControl 300)
scsi 6:0:0:0: >Direct-Access ATA ST3500320AS SD15 PQ: 0 ANSI: 5
sd 6:0:0:0: >[sda] 976771055 512-byte logical blocks: (500 GB/465 GiB)
sd 6:0:0:0: >Attached scsi generic sg1 type 0
sd 6:0:0:0: >[sda] Write Protect is off
sd 6:0:0:0: >[sda] Mode Sense: 00 3a 00 00
sd 6:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 3-2: >new low-speed USB device number 2 using uhci_hcd
sda: sda1 sda2 < sda5 >
sd 6:0:0:0: >[sda] Attached SCSI disk
Freeing unused kernel memory: 928k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1472k freed
Freeing unused kernel memory: 1124k freed
udevd[117]: starting version 175
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: >irq 45 for MSI/MSI-X
r8169 0000:04:00.0: >eth0: RTL8168b/8111b at 0xffffc90000646000, 00:1d:7d:8f:7d:a1, XID 18000000 IRQ 45
r8169 0000:04:00.0: >eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
usbcore: registered new interface driver uas
scsi8 : usb-storage 2-1:1.0
usbcore: registered new interface driver ums-realtek
usb 3-2: >New USB device found, idVendor=0d62, idProduct=a100
usb 3-2: >New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 3-2: >Product: USB Optical Mouse
usb 3-2: >Manufacturer: Darfon
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Darfon USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input2
hid-generic 0003:0D62:A100.0001: >input,hidraw0: USB HID v1.10 Mouse [Darfon USB Optical Mouse] on usb-0000:00:1a.0-2/input0
pata_jmicron 0000:03:00.1: >setting latency timer to 64
scsi9 : pata_jmicron
scsi10 : pata_jmicron
ata9: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 16
ata10: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 16
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
usb 8-2: >new low-speed USB device number 2 using uhci_hcd
usb 8-2: >New USB device found, idVendor=0d62, idProduct=2028
usb 8-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-2: >Product: Wireless Keyboard & Mouse
usb 8-2: >Manufacturer: Darfon
input: Darfon Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input3
hid-generic 0003:0D62:2028.0002: >input,hidraw1: USB HID v1.10 Keyboard [Darfon Wireless Keyboard & Mouse] on usb-0000:00:1d.2-2/input0
input: Darfon Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/input/input4
hid-generic 0003:0D62:2028.0003: >input,hiddev0,hidraw2: USB HID v1.10 Mouse [Darfon Wireless Keyboard & Mouse] on usb-0000:00:1d.2-2/input1
scsi 8:0:0:0: >Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
sd 8:0:0:0: >Attached scsi generic sg2 type 0
sd 8:0:0:0: >[sdb] Attached SCSI removable disk
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 4191228k swap on /dev/sda5. Priority:-1 extents:1 across:4191228k
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[487]: starting version 175
ACPI Warning: 0x00000000fed1f410-0x00000000fed1f414 SystemMemory conflicts with Region \RCRB 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting iTCO_wdt
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
parport_pc 00:08: >reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
lp: driver loaded but no devices found
gpio_ich: GPIO from 195 to 255 on gpio_ich
ppdev: user-space parallel port driver
microcode: CPU0 sig=0x6fb, pf=0x10, revision=0xb6
microcode: CPU1 sig=0x6fb, pf=0x10, revision=0xb6
microcode: CPU2 sig=0x6fb, pf=0x10, revision=0xb6
microcode: CPU3 sig=0x6fb, pf=0x10, revision=0xb6
microcode: Microcode Update Driver: v2.00 , Peter Oruba
lp0: using parport0 (interrupt-driven).
init: failsafe main process (646) killed by TERM signal
coretemp coretemp.0: >Using relative temperature scale!
coretemp coretemp.0: >Using relative temperature scale!
coretemp coretemp.0: >Using relative temperature scale!
coretemp coretemp.0: >Using relative temperature scale!
snd_hda_intel 0000:00:1b.0: >irq 46 for MSI/MSI-X
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
hda_intel: Disabling MSI
hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input13
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
type=1400 audit(1350876263.737:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=883 comm="apparmor_parser"
type=1400 audit(1350876263.737:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=883 comm="apparmor_parser"
type=1400 audit(1350876263.853:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=884 comm="apparmor_parser"
type=1400 audit(1350876263.857:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=884 comm="apparmor_parser"
type=1400 audit(1350876263.857:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=884 comm="apparmor_parser"
type=1400 audit(1350876263.861:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=882 comm="apparmor_parser"
type=1400 audit(1350876263.861:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=882 comm="apparmor_parser"
type=1400 audit(1350876263.869:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=881 comm="apparmor_parser"
type=1400 audit(1350876263.869:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=881 comm="apparmor_parser"
type=1400 audit(1350876263.881:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=905 comm="apparmor_parser"
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
r8169 0000:04:00.0: >eth0: link down
r8169 0000:04:00.0: >eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.51 Tue Sep 18 17:16:56 PDT 2012
init: udev-fallback-graphics main process (1222) terminated with status 1
init: plymouth-splash main process (1237) terminated with status 1
r8169 0000:04:00.0: >eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
NVRM: GPU at 0000:01:00: GPU-b2d38fe0-4ea7-f0c6-e66d-d60ce27a318f
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 6:0:0:0: >[sda] Synchronizing SCSI cache
parport_pc 00:08: >disabled
serial 00:07: >disabled
serial 00:07: >wake-up capability disabled by ACPI
sd 6:0:0:0: >[sda] Stopping disk
PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 119.841 msecs
ACPI handle has no context!
PM: suspend of drv:snd_hda_intel dev:0000:01:00.1 complete after 463.894 msecs
PM: suspend of drv:pcieport dev:0000:00:01.0 complete after 459.704 msecs
PM: suspend of drv: dev:pci0000:00 complete after 459.684 msecs
PM: suspend of devices complete after 479.666 msecs
PM: suspend devices took 0.480 seconds
PM: late suspend of devices complete after 0.262 msecs
pcieport 0000:00:1c.4: >wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.7: >wake-up capability enabled by ACPI
uhci_hcd 0000:00:1d.2: >wake-up capability enabled by ACPI
uhci_hcd 0000:00:1d.1: >wake-up capability enabled by ACPI
uhci_hcd 0000:00:1d.0: >wake-up capability enabled by ACPI
ehci_hcd 0000:00:1a.7: >wake-up capability enabled by ACPI
uhci_hcd 0000:00:1a.2: >wake-up capability enabled by ACPI
uhci_hcd 0000:00:1a.1: >wake-up capability enabled by ACPI
uhci_hcd 0000:00:1a.0: >wake-up capability enabled by ACPI
PM: noirq suspend of devices complete after 47.821 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
Broke affinity for irq 16
Broke affinity for irq 18
Broke affinity for irq 23
Broke affinity for irq 44
CPU 2 is now offline
CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
Booting Node 0 Processor 1 APIC 0x2
CPU1 is up
Booting Node 0 Processor 2 APIC 0x3
CPU2 is up
Booting Node 0 Processor 3 APIC 0x1
CPU3 is up
ACPI: Waking up from system sleep state S3
uhci_hcd 0000:00:1a.0: >wake-up capability disabled by ACPI
uhci_hcd 0000:00:1a.1: >wake-up capability disabled by ACPI
uhci_hcd 0000:00:1a.2: >wake-up capability disabled by ACPI
ehci_hcd 0000:00:1a.7: >wake-up capability disabled by ACPI
uhci_hcd 0000:00:1d.0: >wake-up capability disabled by ACPI
uhci_hcd 0000:00:1d.1: >wake-up capability disabled by ACPI
uhci_hcd 0000:00:1d.2: >wake-up capability disabled by ACPI
ehci_hcd 0000:00:1d.7: >wake-up capability disabled by ACPI
PM: noirq resume of devices complete after 1.097 msecs
PM: early resume of devices complete after 0.071 msecs
uhci_hcd 0000:00:1a.0: >setting latency timer to 64
uhci_hcd 0000:00:1a.1: >setting latency timer to 64
usb usb3: >root hub lost power or was reset
usb usb4: >root hub lost power or was reset
uhci_hcd 0000:00:1a.2: >setting latency timer to 64
ehci_hcd 0000:00:1a.7: >setting latency timer to 64
usb usb5: >root hub lost power or was reset
uhci_hcd 0000:00:1d.0: >setting latency timer to 64
uhci_hcd 0000:00:1d.1: >setting latency timer to 64
usb usb6: >root hub lost power or was reset
usb usb7: >root hub lost power or was reset
uhci_hcd 0000:00:1d.2: >setting latency timer to 64
ehci_hcd 0000:00:1d.7: >setting latency timer to 64
usb usb8: >root hub lost power or was reset
pci 0000:00:1e.0: >setting latency timer to 64
pcieport 0000:00:1c.4: >wake-up capability disabled by ACPI
ahci 0000:00:1f.2: >setting latency timer to 64
snd_hda_intel 0000:00:1b.0: >irq 46 for MSI/MSI-X
pata_jmicron 0000:03:00.1: >setting latency timer to 64
serial 00:07: >activated
parport_pc 00:08: >activated
PM: resume of drv: dev:ep_00 complete after 117.435 msecs
PM: resume of drv:hub dev:4-0:1.0 complete after 117.478 msecs
PM: resume of drv: dev:ep_81 complete after 117.469 msecs
PM: resume of drv:hub dev:5-0:1.0 complete after 121.375 msecs
PM: resume of drv: dev:ep_00 complete after 121.350 msecs
PM: resume of drv: dev:ep_81 complete after 121.367 msecs
PM: resume of drv: dev:ep_00 complete after 125.272 msecs
PM: resume of drv:hub dev:6-0:1.0 complete after 125.303 msecs
PM: resume of drv: dev:ep_81 complete after 125.297 msecs
PM: resume of drv:hub dev:7-0:1.0 complete after 125.252 msecs
PM: resume of drv: dev:ep_00 complete after 125.228 msecs
PM: resume of drv: dev:ep_81 complete after 125.245 msecs
PM: resume of drv:scsi dev:host9 complete after 160.906 msecs
PM: resume of drv:scsi_host dev:host9 complete after 160.905 msecs
PM: resume of drv:scsi dev:host10 complete after 172.450 msecs
PM: resume of drv:scsi_host dev:host10 complete after 172.442 msecs
PM: resume of drv:hub dev:3-0:1.0 complete after 221.472 msecs
PM: resume of drv: dev:ep_00 complete after 221.444 msecs
PM: resume of drv: dev:ep_81 complete after 221.466 msecs
PM: resume of drv:usb dev:3-2 complete after 220.927 msecs
PM: resume of drv: dev:ep_00 complete after 233.136 msecs
PM: resume of drv:hub dev:8-0:1.0 complete after 233.170 msecs
PM: resume of drv:usb dev:8-2 complete after 232.776 msecs
PM: resume of drv: dev:ep_81 complete after 233.166 msecs
ata8: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
PM: resume of drv:scsi dev:host1 complete after 341.941 msecs
PM: resume of drv:scsi dev:host7 complete after 341.683 msecs
PM: resume of drv:scsi_host dev:host1 complete after 341.946 msecs
PM: resume of drv:scsi_host dev:host7 complete after 341.677 msecs
ata6: SATA link down (SStatus 0 SControl 300)
PM: resume of drv:scsi dev:host4 complete after 357.788 msecs
PM: resume of drv:scsi_host dev:host4 complete after 357.781 msecs
PM: resume of drv:scsi dev:host5 complete after 365.751 msecs
PM: resume of drv:scsi_host dev:host5 complete after 365.744 msecs
usb 3-2: >reset low-speed USB device number 2 using uhci_hcd
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
PM: resume of drv:scsi dev:host0 complete after 661.926 msecs
PM: resume of drv:ata_port dev:ata1 complete after 652.883 msecs
PM: resume of drv:scsi_host dev:host0 complete after 661.935 msecs
PM: resume of drv:scsi dev:target0:0:0 complete after 661.145 msecs
PM: resume of drv:sr dev:0:0:0:0 complete after 661.141 msecs
PM: resume of drv:scsi_device dev:0:0:0:0 complete after 661.141 msecs
PM: resume of drv:usbhid dev:3-2:1.0 complete after 798.449 msecs
PM: resume of drv: dev:ep_00 complete after 798.418 msecs
PM: resume of drv: dev:ep_81 complete after 798.442 msecs
PM: resume of drv:ums-realtek dev:2-1:1.0 complete after 824.808 msecs
PM: resume of drv: dev:ep_00 complete after 824.765 msecs
PM: resume of drv: dev:ep_82 complete after 824.794 msecs
PM: resume of drv: dev:ep_01 complete after 824.809 msecs
PM: resume of drv:scsi dev:host8 complete after 824.723 msecs
PM: resume of drv:scsi_host dev:host8 complete after 824.717 msecs
PM: resume of drv:scsi dev:target8:0:0 complete after 824.460 msecs
PM: resume of drv:sd dev:8:0:0:0 complete after 824.451 msecs
PM: resume of drv:scsi_device dev:8:0:0:0 complete after 824.449 msecs
usb 8-2: >reset low-speed USB device number 2 using uhci_hcd
PM: resume of drv:usbhid dev:8-2:1.1 complete after 1379.938 msecs
PM: resume of drv:usbhid dev:8-2:1.0 complete after 1379.969 msecs
PM: resume of drv: dev:ep_00 complete after 1379.916 msecs
PM: resume of drv: dev:ep_82 complete after 1379.933 msecs
PM: resume of drv: dev:ep_81 complete after 1379.966 msecs
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.00: configured for UDMA/133
PM: resume of drv:scsi dev:host6 complete after 7269.678 msecs
PM: resume of drv:ata_port dev:ata7 complete after 6607.948 msecs
PM: resume of drv:scsi_host dev:host6 complete after 7269.677 msecs
PM: resume of drv:scsi dev:target6:0:0 complete after 7269.020 msecs
PM: resume of drv:sd dev:6:0:0:0 complete after 7269.013 msecs
sd 6:0:0:0: >[sda] Starting disk
PM: resume of drv:scsi_device dev:6:0:0:0 complete after 7301.894 msecs
PM: resume of devices complete after 7303.270 msecs
PM: resume devices took 7.336 seconds
PM: Finishing wakeup.
Restarting tasks ... done.
r8169 0000:04:00.0: >eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:04:00.0: >eth0: link down
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
r8169 0000:04:00.0: >eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
audit_printk_skb: 39 callbacks suppressed
type=1701 audit(1350914036.095:25): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10496 comm="chrome" reason="seccomp" sig=0 syscall=39 compat=0 ip=0x7faa53b42ed9 code=0x50000
type=1701 audit(1350914042.163:26): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10754 comm="chrome" reason="seccomp" sig=0 syscall=39 compat=0 ip=0x7f0e4fee7ed9 code=0x50000
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
type=1701 audit(1350914123.779:27): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10900 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7faa53b396b0 code=0x50000
type=1701 audit(1350914123.779:28): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10900 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7faa53b396b0 code=0x50000
type=1701 audit(1350914123.783:29): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10906 comm="chrome" reason="seccomp" sig=0 syscall=59 compat=0 ip=0x7faa53b12c27 code=0x50000
type=1701 audit(1350914123.999:30): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10744 comm="chrome" reason="seccomp" sig=0 syscall=83 compat=0 ip=0x7f0e4fede647 code=0x50000
type=1701 audit(1350914123.999:31): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10744 comm="chrome" reason="seccomp" sig=0 syscall=83 compat=0 ip=0x7f0e4fede647 code=0x50000
type=1701 audit(1350914124.091:32): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10744 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f0e4fede6b0 code=0x30000
type=1701 audit(1350914124.091:33): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10744 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f0e4fede6b0 code=0x30000
type=1701 audit(1350914124.631:34): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10900 comm="chrome" reason="seccomp" sig=0 syscall=257 compat=0 ip=0x7faa53b39710 code=0x50000
type=1701 audit(1350914124.631:35): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10900 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7faa53b396b0 code=0x50000
type=1701 audit(1350914124.631:36): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10900 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7faa53b396b0 code=0x50000
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
audit_printk_skb: 15 callbacks suppressed
type=1701 audit(1350914191.523:42): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10900 comm="chrome" reason="seccomp" sig=0 syscall=257 compat=0 ip=0x7faa53b39710 code=0x50000
type=1701 audit(1350914191.523:43): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10900 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7faa53b396b0 code=0x50000
type=1701 audit(1350914191.523:44): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10900 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7faa53b396b0 code=0x50000
type=1701 audit(1350914191.523:45): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10900 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7faa53b396b0 code=0x50000
type=1701 audit(1350914195.011:46): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10900 comm="chrome" reason="seccomp" sig=0 syscall=257 compat=0 ip=0x7faa53b39710 code=0x50000
type=1701 audit(1350914195.011:47): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10900 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7faa53b396b0 code=0x50000
type=1701 audit(1350914195.011:48): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10900 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7faa53b396b0 code=0x50000
type=1701 audit(1350914195.011:49): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10900 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7faa53b396b0 code=0x50000
type=1701 audit(1350914195.603:50): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10900 comm="chrome" reason="seccomp" sig=0 syscall=257 compat=0 ip=0x7faa53b39710 code=0x50000
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
type=1701 audit(1350914240.439:51): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10900 comm="chrome" reason="seccomp" sig=0 syscall=257 compat=0 ip=0x7faa53b39710 code=0x50000
type=1701 audit(1350914240.439:52): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10900 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7faa53b396b0 code=0x50000
type=1701 audit(1350914240.439:53): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10900 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7faa53b396b0 code=0x50000
type=1701 audit(1350914240.439:54): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10900 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7faa53b396b0 code=0x50000
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
type=1701 audit(1350914294.147:55): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10900 comm="chrome" reason="seccomp" sig=0 syscall=257 compat=0 ip=0x7faa53b39710 code=0x50000
type=1701 audit(1350914294.147:56): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10900 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7faa53b396b0 code=0x50000
type=1701 audit(1350914294.147:57): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10900 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7faa53b396b0 code=0x50000
type=1701 audit(1350914294.147:58): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=10900 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7faa53b396b0 code=0x50000
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
type=1701 audit(1350914418.335:59): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11100 comm="chrome" reason="seccomp" sig=0 syscall=39 compat=0 ip=0x7f47fe65aed9 code=0x50000
type=1701 audit(1350914419.027:60): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11185 comm="chrome" reason="seccomp" sig=0 syscall=39 compat=0 ip=0x7fcfe74c1ed9 code=0x50000
type=1701 audit(1350914427.475:61): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
type=1701 audit(1350914427.475:62): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
type=1701 audit(1350914427.479:63): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11212 comm="chrome" reason="seccomp" sig=0 syscall=59 compat=0 ip=0x7f47fe62ac27 code=0x50000
type=1701 audit(1350914427.555:64): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11137 comm="chrome" reason="seccomp" sig=0 syscall=83 compat=0 ip=0x7fcfe74b8647 code=0x50000
type=1701 audit(1350914427.555:65): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11137 comm="chrome" reason="seccomp" sig=0 syscall=83 compat=0 ip=0x7fcfe74b8647 code=0x50000
type=1701 audit(1350914427.599:66): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11137 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7fcfe74b86b0 code=0x30000
type=1701 audit(1350914427.599:67): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11137 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7fcfe74b86b0 code=0x30000
type=1701 audit(1350914427.995:68): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=257 compat=0 ip=0x7f47fe651710 code=0x50000
type=1701 audit(1350914427.995:69): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
type=1701 audit(1350914427.995:70): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
audit_printk_skb: 15 callbacks suppressed
type=1701 audit(1350914893.935:76): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=257 compat=0 ip=0x7f47fe651710 code=0x50000
type=1701 audit(1350914893.935:77): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
type=1701 audit(1350914893.935:78): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
type=1701 audit(1350914893.935:79): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
type=1701 audit(1350914894.587:80): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=257 compat=0 ip=0x7f47fe651710 code=0x50000
type=1701 audit(1350914894.587:81): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
type=1701 audit(1350914894.587:82): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
type=1701 audit(1350914894.587:83): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
type=1701 audit(1350914906.503:84): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=257 compat=0 ip=0x7f47fe651710 code=0x50000
type=1701 audit(1350914906.503:85): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
type=1701 audit(1350914906.503:86): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
type=1701 audit(1350914906.503:87): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
type=1701 audit(1350917099.911:88): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=257 compat=0 ip=0x7f47fe651710 code=0x50000
type=1701 audit(1350917099.911:89): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
type=1701 audit(1350917099.911:90): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
type=1701 audit(1350917099.911:91): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
type=1701 audit(1350918626.195:92): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=257 compat=0 ip=0x7f47fe651710 code=0x50000
type=1701 audit(1350918626.195:93): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
type=1701 audit(1350918626.195:94): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
type=1701 audit(1350918626.195:95): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
type=1701 audit(1350918634.167:96): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=257 compat=0 ip=0x7f47fe651710 code=0x50000
type=1701 audit(1350918634.167:97): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
type=1701 audit(1350918634.167:98): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
type=1701 audit(1350918634.167:99): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
type=1701 audit(1350920189.711:100): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=257 compat=0 ip=0x7f47fe651710 code=0x50000
type=1701 audit(1350920189.711:101): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
type=1701 audit(1350920189.711:102): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
type=1701 audit(1350920189.711:103): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
type=1701 audit(1350920275.151:104): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=257 compat=0 ip=0x7f47fe651710 code=0x50000
type=1701 audit(1350920275.151:105): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
type=1701 audit(1350920275.151:106): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
type=1701 audit(1350920275.151:107): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
type=1701 audit(1350920276.895:108): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=257 compat=0 ip=0x7f47fe651710 code=0x50000
type=1701 audit(1350920276.895:109): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
type=1701 audit(1350920276.895:110): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
type=1701 audit(1350920276.895:111): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
type=1701 audit(1350920280.111:112): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=257 compat=0 ip=0x7f47fe651710 code=0x50000
type=1701 audit(1350920280.111:113): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
audit_printk_skb: 6 callbacks suppressed
type=1701 audit(1350920283.975:116): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=257 compat=0 ip=0x7f47fe651710 code=0x50000
type=1701 audit(1350920283.975:117): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
type=1701 audit(1350920283.975:118): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
type=1701 audit(1350920283.975:119): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=11206 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f47fe6516b0 code=0x50000
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
sd 8:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: >[sdb] Asking for cache data failed
sd 8:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 2 using ehci_hcd
usb 2-1: >can't restore configuration #1 (error=-71)
usb 2-1: >USB disconnect, device number 2
scsi 8:0:0:0: >rejecting I/O to offline device
scsi 8:0:0:0: >killing request
usb 2-1: >new high-speed USB device number 4 using ehci_hcd
usb 2-1: >New USB device found, idVendor=0bda, idProduct=0158
usb 2-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: >Product: USB2.0-CRW
usb 2-1: >Manufacturer: Generic
usb 2-1: >SerialNumber: 20060413092100000
scsi11 : usb-storage 2-1:1.0
scsi 11:0:0:0: >Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
sd 11:0:0:0: >Attached scsi generic sg2 type 0
sd 11:0:0:0: >[sdb] Attached SCSI removable disk
usb 2-1: >reset high-speed USB device number 4 using ehci_hcd
sd 11:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 11:0:0:0: >[sdb] Asking for cache data failed
sd 11:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 4 using ehci_hcd
sd 11:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 11:0:0:0: >[sdb] Asking for cache data failed
sd 11:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 4 using ehci_hcd
sd 11:0:0:0: >[sdb] Test WP failed, assume Write Enabled
sd 11:0:0:0: >[sdb] Asking for cache data failed
sd 11:0:0:0: >[sdb] Assuming drive cache: write through
usb 2-1: >reset high-speed USB device number 4 using ehci_hcd